Honeywell HW-QUICK12E Instruction Manual page 9

HW-QUICK12E_GB_OM.qxd 4/2/07
ENGLISH
TIMER Mode
During operation it is possible to select the OFF TIME between 0 and 24 hours to
stop the unit automatically after selected time period has elapsed.
During no operation it is possible to select ON TIME between 0 and 24 hours to start
the unit automatically after selected time period has elapsed.
When the unit is off press TIMER ON key and set ON TIME in a range of 0 to 24
hours to start the unit automatically.
12:04 PM Page 8
When the unit is operating
press TIMER OFF key and set
OFF TIME in range of 0 to 24
hours to stop the unit auto-
matically.
SLEEP Mode
When using SLEEP Mode in combination with the COOL or DRY Mode, the set tem-
perature will increase 1°C in the first hour and 2°C in the second hour, additionally
the indoor fan will run at low speed.
When using SLEEP Mode in combination with HEAT Mode, the set temperature will
decrease 1°C in the first hour and 2°C in the second hour. Additionally the indoor
fan will run at low speed.
3. Press SWING key to start
or stop oscillating louvers.
6. Press SLEEP key to set
SLEEP Mode.
1. Plug in, press ON/OFF key, then the air conditioner is switched on.
2. Press MODE key to set , and
3. Press SWING key to start or stop oscillating louvers.
4. Press FAN to set fan speed.
5. Press TEMP. key to set required room temperature.
6. Press SLEEP key to set SLEEP Mode.
8
4. Press FAN to set fan speed.
1. Plug in, press ON/OFF key,
then the air conditioner is
switched on.
5. Press TEMP. key to set
required room temperature.
2. Press MODE key to set
, and mode to
ensure comfortable effect.
mode to ensure comfortable effect.