Installation Of Outdoor Unit - Honeywell HW-QUICK12E Instruction Manual

HW-QUICK12E_GB_OM.qxd 4/2/07
ENGLISH
(Fig. 4) (Fig. 5)
Wrap Tape
Connection
Pipe
Power Cord
Tailing 2
Tailing 1
(c)

Installation of Outdoor Unit

Warning
To avoid personal injuries use gloves for moving and installing the outdoor unit.
Description of the quick connector system
What is the quick connector?
The quick connector is a system for installing and disassembling wall-mounted split
air conditioner without special tools or equipment. The quick connector connects
the indoor unit and outdoor unit.
Construction of the quick connector
The quick connector consists of a female and male part. The female part is on the
outdoor unit. After disassembling the cover of the quick connector of the outdoor
unit, you are able to see the female part of the quick connector. The male part of the
quick connector is at the end of the pipes that are assembled at the indoor unit. The
pipes are pre-filled with refrigerant gas.
Follow the instructions to connect the quick connector.
In order to minimise the potential for fluid losses, always keep the quick connector
connected, even when the air conditioner is not in use.
While unit is operating, do not disconnect the quick connector. In order to equalise
line pressures, wait at least 5 minutes before opening the quick connector after
switching off the air conditioner.
While connecting or disconnecting do not drop the quick connector on a hard
surface and do not use a damaged quick connector.
12:04 PM Page 12
(Fig. 6)
Rear Panel
Drainage Hose
Air Discharge
Distance to the Ceiling
12