Beko P7 Service Manual page 25

Via aerial socket
Make sure the TV and video recorder are both
switched off.
Unplug the aerial lead form the TV and plug
it into the aerial socket on the video
recorder.
Plug a coaxial plug into the RF out socket on
the rear of the video recorder and plug the
other end into the aerial socket on the TV.
Switch on the video recorder and the TV. If
your video recorder has a test signal, switch
it on. (Refer to the video recorder user guide).
See 'Tuning the TV' and carry out the tuning
procedure for the video recorder test signal.
Select a programme number 0.
Audio In (R)
Audio In (L)
Video In
S-Video In
Audio In (R)
Audio In (L)
Via RCA lead and S-Video socket
You can also connect it through the
S-Video socket of the TV.
Plug the S-Video plug into the S-Video socket
and the audio leads into the audio sockets.
SCART - 2
SPEAKER OUT
AV IN
SCART - 1
ANT VIDEO
SVHS
AV OUT
L R VIDEO L R