Table of Contents
Advertisement
If you do not know the Channel
number
Press the ( ) button. Press the right move
( ) button to select the Adjustment
menu.
You can reach this menu directly by
pressing the ( ) button.Using the
Up/down (
Set-Up line and press the ( ) button, the
screen will show the Set-Up menu.
Select the program you want to Set-Up
by using the Right-left ( )/( ) buttons or
the numeric keys. Choose the system in
which to do a search among the system
lines. Enter the System line using the
down button(
set to one system, you can also select
from (
)/(
(option) Move to the Band line using the down
button (
).
Using the right-left ( )/( ) buttons on your remote
control select "C" for the cable channels received
through the "S" antena. Use the down (
to select the Search line, and scan the channels
using the right ( ) button to increase and the
left ( ) button to decrease. Select the Saving
line if you found the channel in the quality you
desire.
Afterwards press the (
memory. For the other channels using the Program
No line, select the program numbers you want
and repeat the same process.
If you want to Fine Tune or name the channel
you found, please refer to the concerning sections.
)/(
) buttons select the
).Here your TV can be
) more than one systems.
) button
) button to store into
ENGLISH -18-
Fine tuning
If the current channel requires fine tuning,
select the Manual Fine Tuning bar by
using the down (
Manual Tuning menu. Using the right-
left movement ( )/( ) buttons on your
remote control you will have the ability
to get the exact quality of tuning
required. Under normal conditions you
will not need Fine Tuning. Your television
will automatically lock channels, which
need AFC values. However, in the event
that the TV transmitters do not work,
then you may need to use this process. For
storing the settings to the memory press (
button.
) button in the
)
Advertisement
Table of Contents
