NEFF WASHER-DRYER Installation And Operating Instructions Manual page 24

Removing the transport
safety bolts
Positioning and
levelling
Positioning
Downloaded from www.Manualslib.com
Unscrew all four screws
using the spanner
supplied.
Insert the protective
covers.
– Appliance stability is essential to ensure that the washer-dryer does not
"creep" during spin cycles.
– The installation area must be firm, clean and level.
– Parquet floors and soft floor coverings, e.g. carpets or foam-backed
floor coverings, are unsuitable.
Slide sheets make it easier to slide the washing machine into the
installation recess.
– Can be ordered from the after-sales service, spare part no. 66 1827.
– Moisten the slide sheets with a mixture of water and washing-up liquid
before sliding the washer-dryer into place. Do not use grease and/or
oil.
manuals search engine
Remove all 4 transport safety bolts
completely and take the mains cable out of
the retainers.
– Before using the appliance for the first
time, you must make sure that all
4 transport safety bolts have been
removed and kept safe for any
subsequent transport.
– If you need to transport the appliance at a
later date, always refit the transport safety
bolts to prevent damage to the washer-
dryer.
24