8
AUDIO SYSTEM
B
A
E
To enter frequencies into the memory (AM/FM/SAT)
1. Press A to turn on the audio system.
2. Press B to select the desired band (am/fm/sat).
3. Press C to seek station
4. hold down one of the memory select buttons D (1-6) until it
beeps in order to save that station to memory.
VOLUME
audio Remote
control switch
Down
D
C
MODE
change the audio
source
UP
Usb and iPod input (if equipped)
1. Park your vehicle in a safe place and turn the ignition switch to lock
position.
2. connect the cable
Usb memory device
3. open the cover
Usb input terminal
4. turn the ignition switch to the "ACC" position. turn on the audio
system.
5. Press E several times to switch to the Usb mode. the input mode
SEEK
changes as follows:
change station
CD USB Bluetooth
or track
6. Depending on your Usb device, it may take longer for playback to start.
7. once the device is selected, playback starts.
With Display Audio System, follow steps 1 through 4 above
5. Press MENU on the touch screen.
6. touch USB.
7. touch <Folder> then select a track and begin playback.
(cable is not included with the vehicle) to the
or the Dock connector
in the floor console box. connect the cable
.
(if equipped)
®
to the iPod
.
to the