Oven Assembly - Blodgett XR8-G Installation Operation & Maintenance

Installation

Oven assembly

aSSEMBLY TO STand
1. Center the oven frame on top of the stand so that the
oven overhangs at both the front and back.
2. Remove the three screws at the top of the left and
right side panels of the oven. Remove the side pan-
els.
Side view with stand
Figure 1
3. Align the two bolt holes on each side of the stand with
the two threaded holes on each side of the oven.
4. Insert a bolt from the bottom up through each of the
two holes and tighten securely.
5. Reinstall the side panels.
4