Software Version Numbers; Keypad Test Mode; Diagnostic States - Life Fitness T3 Service Manual

Life Fitness T-Series Consumer Treadmills

DIAGNOSTIC STATES

1. SOFTWARE VERSION NUMBERS

This state shows the current Software Version for the Console, Motor Controller, and Software Part Number. Use
the up/down arrow keys for the T3i/T5i and T7i Consoles. Use the time arrow keys on T3/T5 Consoles. Use these
keys to toggle between the console software version and the motor controller version. The Console software
version number is displayed as "CONSOLE VER=PXX.X" on the T3i/T5i and CONxx.x is the version number on
the T3/5. The motor controller software version number is displayed "MOTOR VER=PXX.X" on the T3i/T5i/T7i and
Pxx.x is the version number on the T3/5.
This state checks the Polar receiver. The Heart Rate LED blinks at the same rate as the receiver Heart Rate. If the
LED never blinks then the Console is not receiving a polar sign.
2. DISPLAY TEST MODE
This state scrolls the LEDs. The Time Window consists of four(4) segments. During this operation, the first and last
segments will not display decimals

3. KEYPAD TEST MODE

This state allows you to test the keypad. Anytime you press a key, you will hear a beep, and will see what key you
have pressed in the display.
Button
Workout Profiles
Up Arrow
Down Arrow
My Workout
Time Up
Time Down
Walk
Jog
Run
Enter
Cool Down
Incline Up
Incline Down
Stop
Speed Up
Speed Down
Emergency Stop
Switch
4
Keypad Test Table T3i/T5i/T7i
Display
WPPPPPPPPPPPPPPP
^^^^^^^^^^^^^^^^^^
vvvvvvvvvvvvvvvvvvvvvv
UUUUUUUUUUUUUUUUUU
T-^^^^^^^^^^^^^^^^
T-vvvvvvvvvvvvvvvvvvv
WWWWWWWWWWW
JJJJJJJJJJJJJJJJJJJJJJJJJJJ
RRRRRRRRRRRRRRR
This will automatically jump to the next diagnostics state
CCCCCCCCCCCCCCC
I-^^^^^^^^^^^^^^^^^
I-vvvvvvvvvvvvvvvvvv
This will automatically jump to the last diagnostics state
S-^^^^^^^^^^^^^^^^^
S-vvvvvvvvvvvvvvvvvv
When pulled "E STOP--------"
When replaced "---------------"
Section 2