Avaya 6408 User Manual page 17

2. To end the test, release Trnsfr. The lights return to normal operation.
Note: If the lights or the display segments do not respond during the test, see your system manager.
To view the elapsed time:
1. Press the Menu button and then the softkey below Timer (if available on your display). This exits you from
Softkey Mode.
or, Press Timer (if administered).
The display shows the elapsed time.
To stop the timer and clear the display:
1. Press the Menu button and then the softkey below Timer again (if available on your display).
or, Press Timer again.
The elapsed time is displayed for about three seconds and then disappears.
To send the present call to another number:
1. Press Trnsfr while on a call. The present call is put on hold. The green light blinks. You are given a new
call appearance button and dial tone.
2. Dial the number to which the call is to be transferred.
3. Remain on the line and announce the call. If the line is busy of there is no answer, return to the call on
hold by pressing its call appearance button.
4. Press Trnsfr again. The call is sent to the dialed number.
Note: If you hang up before pressing Trnsfr again, the caller will not be transferred. Press the
flashing line and start the transfer process again from step 1.
5. Hang up
Page 16
Timer
Transfer