Volume Control By Push-Button (Optional For Itc* Only); Mute (Optional) - oticon CIC Instructions For Use Manual

Volume control by push-button
(optional for Itc* only)
Only when using two instruments a Volume Control by Push-button can be activated.
The volume control allows you to adjust the loudness of your hearing device given
specific listening situations.
By pressing the push-button on one instrument, the volume is adjusted in both instru-
mentssimultaneously.
To increase volume, give a short press to the push-button on the RIGHT ear instrument.
To decrease volume, give a short press to the push-button on the LEFT ear instrument.
You hear a beep when you increase or decrease the volume.
When the hearing instrument is turned on, it starts up at a preferred volume level.
When adjusting the volume control to the preferred level, this is indicated by a beep.
* Does not apply to ITC Power instruments.
24

Mute (optional)

Use the mute function if you need to silence the instrument while you have the
instrument on.
Push the button for a minimum of 3 seconds to mute the instrument.
To reactivate the instrument, push the button briefly again.
IMportant notIcE
Do not use the mute function as a switch off as the hearing instrument still draws
current from the battery in this mode.
PUSH
3 sec
25