Removing Screen; Installing Canopy - Vermont Castings DFS3224A Installation And Operating Instructions Manual

GENERAL INSTALLATION INFORMATION

REMOVING SCREEN

Remove fi replace screen frame panel by pushing screen frame panel up and out. See Figure 4.
Do not operate the unit without
the screen frame panel and canopy
installed.
NOTE: Fireplace screen must be removed to access log box and to install canopy.

INSTALLING CANOPY

1. Remove the fi replace screen as described in the previous section.
2. Align the black canopy with the holes in the top frame assembly. See Figure 5.
3. Install the three (3) screws (in ownerʼs manual packaging) which attach the canopy to the top frame assembly.
See Figure 5.
4. Tighten all screws. Make sure the canopy is level and secure. Install the fi replace screen.
12
Fireplace
Screen
Figure 4 - Removing Fireplace Screen Frame Panel
Figure 5 - Canopy Installation
Canopy
Canopy
Screws
26D3310