Table of Contents
Advertisement
Before
You Call for Service
I0
If the cooling fan continues
to operate after the oven has
been turned off:
€ this is normal. The fan will automatically
shut off when
the oven is cooled.
If a fan is heard
while using the broil or clean modes:
• this is the cooling fan and is normal. The fan will
continue to mn after use until the oven cools.
Fault Codes
€ fault codes are shown in the display as "F" and a number.
If a fault code appears
in the display and beeps sound,
press the Cancel
pad. If the fault code and beeps con-
tinue after pressing
cancel, disconnect
power to the wall
oven. Wait a few minutes,
then reconnect
power
to the
oven. If the fault code and beeps still continue,
discon-
nect power to the wall oven and call an authorized
servicer°
• if the oven is heavily
soiled, excessive
flare-ups
may re-
sult in a fault code during
a clean cycle. Press Cancel
pad and allow the oven to cool for one hour, then reset
the clean cycle. If the fault code and beeps still continue,
disconnect
power to the appliance
and call an authorized
servicer.
• if an error beep sounds (two short beeps) with no fault
code in the display,
clean any spill from key pad area
within 30 seconds.
If, after 30 seconds
the spill is not
removed
or another problem exists, an F7 fault code will
be displayed.
Disconnect
power to the appliance
and call
an authorized
servicer.
Advertisement
Table of Contents
