Jenn-Air JIVR /8530 User Manual page 12

[JCare and Cleaning
To Delay the Start of a Clean Cycle
1-3. Follow steps !-3 on page i0.
4. Press the Stop Time pad. Indicator words STOP TIME
will flash in the display and CLEAN and the calculated
stop time will also appear in the display.
5. Press the appropriate number pads to enter the stop time.
A stop time can only be accepted for later in the day.
Example: If at 9:00 you set the oven to clean for three
hours, the calculated stop time would be "12:00". The
display will show:
12:00 1
S_3P Ti_
If you want the stop time to be 1:00, press the number pads
"1,0,0". Five seconds later the display will briefly show
the start time and the indicator word DELAY.
If 0:00
t
_J.AY START _
After a brief time, the display will return to the current time
of day with the indicator words DELAY TIMED CLEAN
remaining in the display.
9:00
When the oven begins to clean, the indicator word ON and
the cooling fan will come on. The indicator word DELAY
will go off.
When the clean time has been completed, the indicator
words CLEAN and ON will go off. The indicator word
LOCK and the cooling fan will remain on until the oven has
cooled down and the door has been unlocked.
To Cancel Self-Clean
1. Press the Cancel pad. The door will be locked while the
LOCK indicator word remains in the display.
Depending on the length of time the oven had been
cleaning, it may take up to an hour for the oven to cool
down. When the oven is cool the door will unlock and the
cooling fan will turn off.
!1, If more than five seconds elapse between pressing
t!, The oven door wilt be damaged if the oven door is
forced to open when the LOCK indicator wordis still
displayed,