Cutting Unit - WAGO TP298 Manual

Within the first setting, you may activate or deactivate "DHCP", respectively. For changes, press the
key.
One step further to the right, you will find the IP address setting. Press the key to modify the
setting. Using the arrow buttons, any number can be entered.
When all connections have been made, you may turn the printer on by actuating the power switch.
The printer will run through a quick system check. Upon execution of the check, the button "Feed"
and "Menu" in the navigator pad will light up. The printer is now ready.
5.6.

Cutting unit

You can add a cutting unit (Item No. 258-161) to your printer, for automatically cutting the
®
TOPJOB S marking strips to their appropriate length.
The printer must be turned off when mounting (or demounting) the cutting unit!
First, you remove the plastic cover on the frontal left enclosure side (below the printer operator pad)
by loosening the Allen screw.
15
TP298