KitchenAid Create-a-Cooktop Installation Instructions Manual page 9

Do Not overtighten screws.
glass cooktop
countertor,
3.
n
5/16" clamping
7
bracket screw
One cooktop or grill in cutout:
Rotate the mounting brackets away from
the burner box. Tighten the mounting brackets to
the burner box. Insert the 2-l/2" clamping screws
into the mounting brackets. Use a screwdriver to
tighten the screws against the underside of the
countertop. Remove the pencil outline from
countertop.
correspond
to steps.
Multiple cooktops and/or grill combinations:
Rotate the left mounting bracket away from the
burner box of the first appliance. Tighten the
mounting bracket to the burner box. Insert the
2-l/2" clamping screw into the mounting bracket.
Use a screwdriver to tighten the screw against
the underside of the countertop.
Rotate right mounting bracket away from the
burner box. Attach other end of mounting bracket
to adjacent appliance with a 5/l 6" screw. Use a
screwdriver to tighten mounting bracket to both
appliances. Repeat for each additional appliance.
Rotate mounting bracket of the appliance that will
be adjacent to the right side of the cutout away
from the burner box. Tighten the mounting
bracket to the burner box. Insert the 2-l/2"
clamping screw into the mounting bracket. Use a
screwdriver to tighten the screw against the
underside of the countertop.
Remove the pencil outline from countertop.
181
. Make the electrical connection. (See
"Electrical requirements" and "Electrical
connection" sections, Pages 6 and 7, for details.)
I 9.1
Turn on the power supply.
Push in and turn each control knob to
the "HI" oosition. Check the ooeration
of the cook-top and or grill heating elements and
indicator lights.
To get the most efficient use from
your new cooktop and/or grill, read
your KitchenAid Use and Care
Guide. Keep Installation Instructions
and Guide close by for easy
reference.
9