KitchenAid Create-a-Cooktop Installation Instructions Manual page 5

Combinations -
When installing cooktops, grills and downdraft vents in the same cutout, use the following width dimensions:
I
Combination
2 cooktops
I
3 cooktops
I
4 cooktops
1 cooktop and
1 downdraft vent I
2 cooktops and
1 downdraft vent I
3 cooktops and
2 downdraft vents
I
Cutout Width
35" min.
I
16-7/e" min.
I
29" min.
Combination
4 cooktops and
3 downdraft vents 1 cooktop, 1 downdraft
2 cooktops,
vent and 1 grill
2 downdraft vents and 1 grill and
3 grills and
1 grill
1 downdraft vent
2 grills and
1 downdraft vent 2 downdraft vents
r
Cutout Width
49" min.
1 e-7/8"
min.
All other dimensions remain the same for all cutouts:
Cutout depth: 20-l/2"
Cutout to front of countertop: 1 -l/2"
Cutout to rear wall: 1"
Cutout to combustible surface: 4" electric
3" gas
Special note for installations with gas cooktop:
9 If a single downdraft vent is to be installed next to a gas cooktop, the
downdraft vent must use the interior mounted vent motor only.
l
If a gas
cooktop
is to be located between two downdraft vents, an
exterior vent motor and 'IT" adapter kit must be used.
l
'7" adapter kits (Black 4175456, White 4319251, Almond 4319252) are
available from your KitchenAid dealer.
5