Jenn-Air 720-0511 Owner's Manual page 19

Sear Burner
1. If you have already attempted to light the searing side burner with the igniter, allow 5 minutes
for any accumulated gas to dissipate.
2. Insert a match into the lighting rod. Ignite the match and insert through the cooking grid to the
burner.
3. Press the control knob and rotate left to the "IGNITE/HI" setting, continue to press the knob
until the burner ignites. The burner should light immediately.
4. If the burner does not light within 4 seconds turn the knob to the "OFF" position, wait 5
minutes and try again.
17
Lighting Rod