Gigabyte A1840 Series User Manual page 7

FCC RF Exposure Guidelines (Wireless Clients)
This device has been tested for compliance with FCC RF Exposure
(SAR) limits in typical portable configurations. In order to comply
with SAR imits established in the ANSI C95.1 standards, it is
V
recommended when using a wireless LAN adapter that the
integrated antenna is positioned more than [20cm] from your body or
nearby persons during extended periods of operation. If the antenna
is positioned less than [20cm] from the user, it is recommended that
the user limit the exposure time.
R&TTE Directive (1999/5/EC)
The following items were completed and are considered relevant
and sufficient for the R&TTE (Radio & Telecommunications Terminal
Equipment) directive:
● Essential requirements as in [Article 3]
● Protection requirements for health and safety as in [Article 3.1a]
● Testing for electric safety according to [EN 60950]
● Protection requirements for electromagnetic compatibility in [Article 3.1b]
● Testing for electromagnetic compatibility in [EN 301 489-1] & [EN 301]
● Testing according to [489-17]
● Effective use of the radio spectrum as in [Article 3.2]
● Radio test suites according to [EN 300 328-2]
CE Notice (European Union)
This symbol indicates this All-in-one PC A1840 complies with
the EMC Directive and the European Union's Low Voltage Directive.
This symbol also indicates that A1840 meets the following technical
standards:
● EN 55022 — "Limitations and Methods of Measurement for the Radio
Interferences of Information Technology Equipment."
● EN 55024 — "Information technology equipment - Immunity
characteristics - Limits and methods of measurement."
● EN 61000-3-2 — "Electromagnetic compatibility (EMC) - Chapter
3: Limits - Section 2: Limits on the harmonic current emissions
(Equipment input current up to and including 16 A per phase)."
● EN 61000-3-3 — "Electromagnetic compatibility (EMC) - Chapter
3: Limits - Section 3: Limits on the voltage fluctuations and flicker in
low-voltage power supply systems for equipment with rate current up
to and including 16 A."
NOTE: EN 55022 emissions requirements provide for two
classifications
● Class A governs commercial use
● Class B is governs residential use
BSMI Notice (Taiwan Only)
● The symbol above must be attached to the product indicating
compliancewith the BSMI standard.
● Note: The maximum operating temperature is 35
℃