Make Sure You Have Everything; Familiarize Yourself With The Computer - Gigabyte A1840 Series User Manual

1.1 Make Sure You Have Everything

When you receive your all-in-one PC, unpack it carefully and check to
make sure you have all the items listed below. For a pre-configured
model you should have the following:
● GIGABYTE A1840 All-in-one PC
2
● AC Adapter with Power Cord
● Driver Disc
● User Manual
● Keyboard(optional)
● Mouse(optional)
Once you have checked and confirmed that your computer system is
complete, read through the following pages to learn about all of your
A1840 components.
NOTE: Depending on the model you purchased, the actual
appearance of your computer may vary from that shown in this
manual.These images are for illustration purposes.
1.2 Familiarize Yourself with the A1840
Preparing To Setup Your computer
Before attempting to set up your computer, to protect the computer and
monitor, you should:
• find a flat open area on your desk to position your computer.
• place a soft item like the computer packaging bag on the desk for
padding.
It is suggested to install your computer in a space that allows
for airflow as restrictingthe airflow may cause overheating which
could impact the performance of your computer.
1. Gently lay the screen face down on a flat clean padded surface.
2. Pull the computer stand till it reaches the first detent stop.
(approximately 10° apart from the rear of the computer).
3. Lift the computer carefully and adjust the angle of the screen.
Please ensure the computer stand has been pulled up to the first
detent position, so that your computer may stand firm and up-
Non-Touch Screen
right.
Now you are ready to access some ports on the rear panel of the
computer to make cable connections.