Starting Your Portable Air Conditioner - Whirlpool AMD 081 Instructions For Use Manual

STARTING YOUR PORTABLE
AIR CONDITIONER
On/Off
This section explains proper portable air
conditioner operation.
IMPORTANT:
• The air conditioner display shows the current
room temperature and 24-hour clock.
• When changing modes while the air conditioner
is operating, the compressor will stop for 3 to 5
minutes before restarting.
If a button is pressed during this time, the
compressor will not restart for another 3 to 5
minutes.
• In Cooling or Dry mode, the compressor and
condenser fan will stop when the room
temperature reaches the set temperature.
NOTE: In the event of a power failure, your air
conditioner will operate at the previous settings
when the power is restored.
Adjust
Mode Fan
Speed
1. Select the mode. See "Mode."
2. Select the fan speed. See "Fan Speed."
3. Set the temperature. See "Temperature."
4. Press ON/OFF button to start the air
NOTE: When the air conditioner is turned on for
the first time after it is plugged in, it will run in the
6th Sense Mode control.
When the air conditioner is turned on at all other
times, it will run according to the previous settings.
6th Sense Mode can be selected with the remote
control only.
5. When WATER FULL indicator light glows red,
5
On
Timer
Off
Swing RapidCool
conditioner.
air conditioner will turn off automatically. See
"Portable Air Conditioner Care" for directions
on draining the air conditioner.
Filter Water
Reset Full