Service Mode And Dip Switch; Outline - Canon DADF-B1 Service Manual

V. SERVICE MODE AND DIP SWITCH
A. Outline
The ADF provides two types of service modes: one accessed from the copier's LCD control
panel, and one accessed from the DIP switch on the ADF controller PCB.
The following are service mode items available with the ADF; use the DIP switch or the copier's
service mode as appropriate. For details of the DIP switch settings, see IV.D. "Using the DIP
Switch."
Item
Sensor level adjustment
Original tray width adjustment
1st page registration position
adjustment
Duplexing (2nd side) registration
position adjustment
Pickup/delivery step operation
Continuous pickup operation
Pickup operation
(in the absence of an original)
Pickup roller cleaning operation
Lifter descent
Lifter ascent
I/O
EEPROM initialization
Counter
: Can be used or displayed
: Cannot be used or displayed
When the ADF is installed, the copier's following service mode item will be disabled:
COPIER>OPTION>BODY>FACE-DWN.
COPYRIGHT © 1999 CANON INC.
FEEDER>Function>SENS-INIT
FEEDER>Adjust>DOCST
FEEDER>Adjust>DOCST-RP
FEEDER>Function>DBLT-CLN
COPIER>I/O>FEEDER
COPIER>COUNTER>FEEDER
CANON DADF-B1 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 TROUBLESHOOTING
Service mode DIP SW
5-19