Canon DADF-B1 Service Manual page 9

Note 1:
The following may not be used as an
original:
• Sheet with holes (as for filing).
• Sheet with a staple, clip, or adhesive.
• Sheet with a cut-and-paste patch.
• Sheet with a carbon back.
• Sheet with large curling, bending, or
wrinkling.
If an original has large curling, straighten
it out as much as possible, and place it so that
the curling edge is the trailing edge.
Note:
The specifications are subject to change
for product improvement.
COPYRIGHT © 1999 CANON INC. CANON DADF-B1 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPITON
Note 2:
Time Taken to Replace Originals
The value indicates the time passing from
when an original is moved to when its trailing
edge reaches the point of exposure. However,
it does not include separation of the original.
Time to replace originals
Figure 1-201
Point of exposure
(leading edge of image)
1-3