Samsung LRT19US Service Manual page 64

3 Disassembly and Reassembly
3-2
6. Remove 3 screws from the shield PCB and lift up
the shield.
7. Disconnect LVDS cable, inverter cable the board.
.
8. Remove 4 screws from the board and lift up the
board.
9. Carefully reomve the silicon glue on the Lamp
wire cable with a nipper and disconnect cable.
10. Remove 2 screws from the inverter PCB and lift
up the board.
11. Lift up the panel shield.
This picture shows cover front after disconnecting
the panel from it.