Wiring - Maytag Performa HJ640NBDVT User Manual

Power direct vent gas water heater
Table of Contents

Advertisement

Instructions for Installation (cont'd)
Wiring (cont'd)
USE WITHOUT POWER CORD (cont'd)
3. A standard 1/2"conduit opening has been made in the
grounded. A green ground screw has been provided on the
water heater junction box for the conduit connection,
water heaters junction box. Connect ground wire to this
location. For complete grounding details and all allowable
4. Use wire nuts and connect the power supply wiring to the
exceptions, refer to the latest edition of the National
wires inside the water heaters junction box.
Electrical Code.
5. The water heater must be electrically "grounded" by the
6. Replace the wiring junction cover using the screw
installer. The unit will not operate unless it is properly
provided.
WIRING DIAGRAM
&CAUTION
Label all wires prio_ction
when servicing
controls,
wiring
errors can cause improper
and
dangerous
operation.
Verify
proper
operation
after servicing.
16

Advertisement

Table of Contents
loading

Table of Contents