Location And Function Of Controls - Akai ACA-271UR Instruction Manual

LOCATION AND FUNCTION OF CONTROLS

5 3 11 15 10
PWR/MUTE
CLK AS/PS MODE
MMC/SD/USB/MP3 PLAYER
VOL+
VOL-
SEL
SD/MMC
1 2
INT
17
2 24 4 16 18
26
SD/MMC
1. RELEASE BUTTON
Press the REL button to release the front control panel from the unit chassis, then
pull it up a little to remove from the unit chassis.
When the front control panel is removed the LED indicator flashes.
2&3&4. SEL BUTTON (Select) AND VOL CONTROL BUTTON
a) Press the SEL button briefly, it is activated as selecting each mode of E. VOL.
-> VOLUME ->BASS ->TREBLE -> BALANCE -> FADER ->
When selecting a desired audio mode, press the VOL+ or VOL- button to adjust the
audio effect.
In each mode, the waiting time is about 5 seconds, after which the last mode is
displayed .
The control mode of E.VOL is operated with following numeric display.
- VOL: (MIN)00, 01,......46, 47(MAX).
- BASS/TRE: -07, -06,...,00,...+06,+07
- BAL: 0LR9, 1LR9, ..., 9LR9,..., 9LR1, 9LR0
- FAD: 0FR9,1FR9, ..., 9FR9,..., 9FR1, 9FR0
b) Press SEL button and hold for more than 2 seconds to turn on TA SEEK/TA ALARM
mode, then press SEL button briefly and repeatedly to select PI SOUND/PI MUTE,
RETUNE L/RETUNE S, MASK DPI/MASK ALL, BEEP ON/BEEP OFF, USER SET
(FLAT/CLASSIC/ROCK/POP),VOL LAST/VOL DEFA , STEREO/MONO(in RADIO
mode), LOUD OFF/LOUD ON,DX/LOCAL (in RADIO mode), CLK ON/CLK OFF,
CLK 12/24 mode. After selecting the desired mode, press the VOL- or VOL+ button
to select one setup item of the desired mode.
6 14 13 12 7 1
AF TA PTY
BND
3 4 5 6
RPT RDM
AUX
19 20
21 22 8 23
25
AUX
Page 1
9