Makita DJR143 Instruction Manual
Cordless reciprocating saw
Hide thumbs
Also See for DJR143:
- Instruction manual (64 pages) ,
- Instruction manual (61 pages) ,
- Instruction manual (65 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita DJR143
Summary of Contents for Makita DJR143
- Page 1 INSTRUCTION MANUAL Cordless Recipro Saw DJR143 DJR145 DJR183 DJR185 014043 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model DJR143 DJR145 DJR183 DJR185 Length of stroke 13 mm Strokes per minute (min 0 - 3,000 Pipe 50 mm Max. cutting capacities Wood 50 mm 392 mm (with BL1415) 392 mm (with BL1815 / BL1815N) - Page 3 of a cord suitable for outdoor use reduces the risk preventive safety measures reduce the risk of of electric shock. starting the power tool accidentally. If operating a power tool in a damp location is 20. Store idle power tools out of the reach of unavoidable, use a ground fault circuit children and do not allow persons unfamiliar with the power tool or these instructions to...
- Page 4 GEB048-2 ENC007-8 CORDLESS RECIPRO SAW IMPORTANT SAFETY SAFETY WARNINGS INSTRUCTIONS Hold power tool by insulated gripping surfaces, FOR BATTERY CARTRIDGE when performing an operation where the cutting accessory may contact hidden wiring. Before using battery cartridge, read all instructions Cutting accessory contacting a "live" wire may and cautionary markings on (1) battery charger, (2) make exposed metal parts of the power tool "live"...
-
Page 5: Functional Description
Battery protection system FUNCTIONAL DESCRIPTION (Lithium-ion battery with star marking) CAUTION: 1. Star marking Always be sure that the tool is switched off and the • battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1. -
Page 6: Adjusting The Shoe
This can be extremely dangerous. Adjusting the shoe NOTE: You can not use the jig saw blade with DJR143 or • 1. Hex wrench DJR183 2. Hex bolt 3. - Page 7 NOTE: If you remove the saw blade without rotating the • blade clamp sleeve fully, the sleeve may not be fixed. In this case, rotate the blade clamp sleeve fully, then make the sleeve fixed at the released position. For Model DJR145, DJR185 1.
-
Page 8: Operation
First, make a pilot groove If you need any assistance for more details regarding using a slower speed. Then use a faster speed to these accessories, ask your local Makita Service Center. continue cutting. Recipro saw blades •... - Page 12 Makita Corporation www.makita.com 885229-7...