Table of Contents
Advertisement
Fault
The laundry is ei-
ther not spun at
all or not spun
satisfactorily.
The machine
shakes during the
spin cycle.
Possible cause
The "No final spin" w button
was pushed in.
The machine was not able to
distribute the laundry load
evenly. To protect the ma-
chine, laundry was either
only spun at a reduced
speed or not at all.
Large items which tangle or
roll up in the drum (e.g. bath
mats) can cause an imbal-
ance during the spin cycle.
The most likely cause is that
the four machine feet are not
resting securely on the floor.
Weak floorboards not only
lead to excessive noise but
also to shaking during the
spin cycle .
Problem solving guide
Remedy
Always make up mixed loads
consisting of large and small
items.
For safety reasons, the ma-
chine does not spin if this is
the case. Attempts to build
up spin speed are repeated,
however, until the time allo-
cated to spinning has ex-
pired.
Check whether
– the drainage system is
clogged. Clean as de-
scribed in "Cleaning and
care" - "Cleaning the
drainage system".
Level the machine (see "In-
stallation" - "Levelling the ma-
chine").
See "Installation" - "Installa-
tion surface.
35
Hide quick links:
Advertisement
Table of Contents
