Connection To Hot Water Supply - Miele WS 5425 MC 13 Operating And Installation Instructions

Connection to hot water
supply
To keep electricity consumption costs
down this machine can be connected
to a (ring) piped hot water supply. The
maximum temperature must not exceed
70°C.
It is not economical to run it from an in-
dividual hot water supply if it is not in
continuous use, as the water in the sup-
ply pipes cools down and more energy
would be required to reheat the water.
For operational reasons the machine
must not be connected to hot water
only.
For hot water connection the same con-
ditions apply as for cold water connec-
tion.
If the machine is not installed for hot
water connection:
^ Both inlet hoses can be connected to
cold water using an adapter piece,
without the machine being repro-
grammed.
or
^ unscrew inlet hose (red stripes)
^ plug the inlet connection with the cap
supplied.
^ The machine will have to be repro-
grammed by an authorised service
dealer.
Installation
49