How To Use - Flymo Hover Vac User Manual

5
K
L
grassbox is full
grassbox is empty
M

How to Use

1. Start at the edge of the lawn nearest to the power
point so the cable is laid out on the lawn you have
already cut. (K)
2. Cut your grass twice a week during the growing
season, your lawn will suffer if more than a third of
its length is cut at one time.
Do Not Overload Your Product
Using in long thick grass may cause the motor speed
to drop, you will hear a change in the motor sound. If
the motor speed drops you may overload your product
which may cause damage. When using in long thick
grass a first cut with the cutting height set higher will
help reduce the load. See Adjusting the Cutting Height.
Grassbox
• For optimum performance your product is
designed to be used with the grassbox fitted.
Grassbox full Indicator (if fitted) (L)
• Your product may be fitted with a grassbox full
indicator.
• IMPORTANT
The machine must be switched on for the
grassbox full indicator to operate.
1. When the ball reaches the top of the indicator win-
dow, it is time to empty the grassbox. See figure
L.
2. When the ball is NOT visible in the indicator win-
dow, grass is being collected. See figure L.
Emptying the Grassbox (M)
• Stop the product and wait until the cutting head
has stopped rotating before emptying the grass-
box.
1. Remove the grassbox lid.
2. Lift the grassbox off the product and empty.
3. Replace grassbox and lid carefully.
• Failure to fit the grassbox and lid correctly will
cause poor collection of grass clippings.