Troubleshooting; Identifying Your Problem - Brother HL-2035 User Manual

6

Troubleshooting

You can correct most problems by yourself. If you need additional help, the Brother Solutions Center offers
latest FAQs and troubleshooting tips. Visit us at http://solutions.brother.com.

Identifying your problem

First, check the following:
The AC power cord is connected properly and the printer is turned on.
All of the protective parts have been removed.
The toner cartridge and drum unit are installed properly.
The front cover is fully closed.
Paper is inserted properly in the paper tray.
The interface cable is securely connected to the printer and the computer.
The correct driver for the printer is installed and selected.
The PC is set up to connect to the correct printer port.
Printer does not print:
If you did not solve your problem with the above checks, please identify your problem and then go to the
section listed:
Printer LED is blinking
See LEDs (Light Emitting Diodes) on page 33.
Status Monitor Error Message appears
See Error messages in the Status Monitor on page 59.
Printer printed an Error Message
See Error message printout on page 60.
Paper handling
See Paper handling on page 60 and Paper jams and how to clear them on page 61.
Other problems
See Other problems on page 67.
Pages are printed, however there are problems with:
Print quality
See Improving the print quality on page 67.
Printout is incorrect
See Solving print problems on page 72.
6
6
6
6
6
6
58