Error Message Printout; Paper Handling - Brother HL-2035 User Manual

Error message printout

The printer will report problems by printing an error message as defined in the following table. Take the
corrective actions for the error message.
Error message
MEMORY FULL
PRINT OVERRUN
RESOLUTION REDUCED TO
ENABLE PRINTING
(The printer has printed the
document at a reduced
resolution)

Paper handling

First, make sure that you are using paper that meets Brother recommended paper specifications. See What
kind of paper can I use? on page 4.
Problem
The printer does not feed
paper.
The printer does not feed paper
from the manual feed slot.
The printer will not feed
envelopes.
A paper jam has occurred.
Action
Press the Go button to print the data left in the printer. Cancel the print job if you
want to delete the data remaining in the printer, see Cancel printing on page 39.
Reduce the print resolution or reduce the complexity of your document.
Press the Go button to print the data left in the printer. Cancel the print job if you
want to delete the data remaining in the printer, see Cancel printing on page 39.
If this does not clear the error, reduce the complexity of your document or reduce
the print resolution.
Set page protection to AUTO by using the supplied Windows
Printer Console program.
Reduce the complexity of your document before you print to prevent automatic
reduction in the resolution.
Recommendation
If there is paper in the paper tray, make sure it is straight. If the paper is curled,
you should straighten it before printing. Sometimes it is helpful to remove the
paper, turn the stack over and put it back in the paper tray.
Reduce the amount of paper in the paper tray, and then try again.
Check that manual feed mode is not selected in the printer driver.
Re-insert the paper firmly, one sheet at a time.
Make sure that manual feed mode is selected in the printer driver.
The printer can feed envelopes from the manual feed slot. Your application
software must be set up correctly to print on the envelope size you are using. This
is usually done in the page setup or document setup menu of your software.
Please see your software application manual.
Clear the jammed paper. See Paper jams and how to clear them on page 61.
Troubleshooting
6
6
®
driver or Remote
6
60