Dome Replacement - Honeywell HD14C4HR6 Installation Manual

Dome Replacement

If the polyccarbonate dome is damaged or scratched beyond use, contact your
distributor or salesperson to order a dome replacement. To replace the HD14
dome (see Figure
1. Use the security hex key (supplied) to loosen the three #8-32 x 7/16 inch
security screws securing the HD14 lid to the base.
2. Use a Phillips screwdriver to remove the three #8-32 x 3/8 inch Hi-lo tapping
screws that attach the dome retainer plate to the front cover.
3. Remove the damaged dome and replace it with the new dome.
4. Use a Phillips screwdriver to attach the dome retainer plate to the HD14 front
plate with the screws you removed in step 2.
5. Use the security hex key to secure the HD14 lid to the base.
Figure 9
Front cover
Dome turret
Retainer plate
Rev 1.01
9):
Dome Replacement
13
8-32 x 7/16 inch captive security
screws (x3)
Polycarbonate dome
Gasket
8-32 x 3/8 inch Hi-lo tapping
screws (x3)
Document 900.0342
10/05