Rear Channel Volume; Delay Time - JBL Simply Cinema ESC550 Simple Setup Manual

Rear Channel Volume

Surround
– +
Calibrate Calibrate
Push "+" on the remote con-
Push "Calibrate" on the
trol to increase the volume
remote control until "Rear"
appears in the display and the of the rear channels.
corresponding LED on top of
the display is lit.

Delay Time

The delay control allows the area and the front speakers as
user to set the surround delay well as the distance between
between 15 and 30 milli- the main listening area and
seconds in 1 millisecond incre- the rear speakers.
ments. The best setting will The chart at the bottom shows
depend on the distance the recommended settings.
between the main listening
40
35
30
25
20
15
10
5
0
0 5 10 15 20 25 30
Distance (in feet) From Front Speakers
Preferable Acceptable
Surround Surround
– + –
Calibrate
Push "–" on the remote
control to decrease the
volume of the rear channels.
Surround
–
Calibrate
Push "Calibrate" on the
remote control until "Delay"
appears in the display and the
corresponding LED on top of
the display is lit.
35 40
+
Surround
+ – +
Calibrate
Push "+" on the remote
control to increase the
delay time.
– 20 –
Surround
– +
Calibrate
Push "–" on the remote
control to decrease the
delay time.