If A Selected Fm Station Is A Little Noisy; To Have The Tuner Search For The Next Strong Station; Preset Operation - JBL Simply Cinema ESC550 Simple Setup Manual

If a Selected FM Station is a Little Noisy:

TV Auto Tune
Tape/Aux Stereo/Mono
Rear
Speakers
Push "Stereo/Mono" on The The "<<" or ">>" on The
Source. This will play the Source or
selected station without any
stereo separation, but there
will be much less background
noise.

Preset Operation

Tuner Presets
Auto Add Auto
Delete
1. Tune to the station that 3. To delete a preset:
you want to add into memory. Push "Delete" on The Source.
That station is now removed
from your selection of stations
2. Push "Add" on The Source.
That station is now added to in memory.
your selection of stations in
memory.
The Source has a unique fea-
ture that will automatically
place up to 32 stations in
memory.
To activate this feature, push
and hold the "Auto" button for
one second.
The tuner will search the dial
and place the stations with a
strong signal into memory.
Skip
AM/FM
Search
Tune
TV
Aux
the remote control will tune
up or down one frequency
at a time.
Tuner Presets
Add Search
Tune
Delete
4. To skip between preset
stations: Push "|<" or ">|"
on The Source or
Note: Activating this feature
will delete all stations that
Tuner Presets were previously stored in
memory. To prevent this from
Auto Add
accidentally occurring, the
Auto button will only activate
Delete
if held for a full second.

To Have the Tuner Search for the Next Strong Station:

AM/FM Repeat
TV Auto Tune
Tape/Aux Stereo/Mono
Rear
Speakers
Push "Auto Tune" on The
Source.
Skip
AM/FM
TV
Aux
the remote control.
– 14 –
Skip
Search
Tune
Then when you push "<<" or the remote the tuner will auto-
">>" on The Source or matically advance to the next
station with a strong signal.
AM/FM
TV
Aux