Technical Changes - Mitsubishi Electric MXZ-24UV -E2 Service Manual

Revision A:
• MXZ-24UV- has been added.
E2
Revision B:
• "Check of HPS" has been corrected.
1

TECHNICAL CHANGES

MXZ-24UV -
E1
1. Combinations of the connectable indoor units have been increased.
2. Noise filter P.C. board has been changed to improve the capacity for protecting the inverter-controlled circuit when the
voltage higher than the rated one is applied with the inverter-controlled circuit.
3. Noise filter P.C. board for "E1" and "E2" are not interchangeable.
4. Service parts have been changed as follows according to above change;
•The value of R (resistor) has been changed. 10Ω
•TB6 (terminal block) has been removed.
MXZ-24UV -
E2
20Ω
2