Configuration
Hardware configurations
Parameterisation
4
Building Technologies
Fire Safety & Security Products
The NK8225 is available in four hardware configurations:
NK8225.2
NK8225.4
NK8225.CL2
NK8225.CL4
Further options:
NH8002
DF8040
8 input module
2
on I
C bus
DF8020
8-output relays module
2
on I
C bus
DF8090
power supply supervision
2
module on I
C bus
NE8001
NE8002
The NK8225 configuration is part of the Composer tool environment. To perform the
SW-configuration for NK8225, a WW8000 Composer license is required.
The configuration tool includes connection parameters, as well as interaction parame-
ters (with AND, OR, XOR, and NOT logic combinations).
–
1 Ethernet line for local or remote host
–
2 serial lines for subsystems
–
1 Ethernet line for local or remote host
–
4 serial lines for subsystems
–
1 Ethernet line for local or remote host
–
1 LON line for subsystems
–
2 serial lines for subsystems
–
1 Ethernet line for local or remote host
–
1 LON line for subsystems
–
4 serial lines for subsystems
–
2 serial port add-on board
–
8 input (non supervised) module for acquiring digital contacts. A
max of 2 modules can be directly connected to NK8225. For
more connectivity (as well as for supervised inputs), it is neces-
sary to use a CF9003 CPU on one of the serial connections.
–
8 output (non supervised) relay module for controlling digital con-
tacts. Only one module can be directly connected to NK8225.
For more connectivity, it is necessary to use a CF9003 CPU on
one of the serial connections.
–
Optional module for supervising the NK8225 power supply and
detecting power failures and battery low conditions. It is not
needed when NK8225 is installed in a fire or intrusion control
unit, whose power supply is already supervised.
–
Wall-mountable, metallic cabinet with DIN-rail, including power
supply unit.
Input: 100 – 240 Vac,; Output: 12Vdc 4A.
–
Wall-mountable, metallic cabinet with DIN-rail.