Brother S-7200A Service Manual page 23

4. FUNCTION SETTINGS
Function No. 90−99
No. Initial value
220
90
(rpm)
220
91
(rpm)
1400
92
(rpm)
220
93
(rpm)
3,000
94
(rpm)
1,800
96
(rpm)
HIL
98
(rpm)
99 (NOTE 28)
(NOTE 27) This is the upper limit for the start backtacking speed setting. Refer to page 4 for details on start backtacking
speed settings.
(NOTE 28) This setting is read from the head detector unit.
(NOTE 29) This is the upper limit for the maximum sewing speed setting. Refer to page 4 for details on maximum sewing
speed settings.
17
Setting range
150–INCH
Thread trimming speed (TRIM)
(rpm)
150–300 (rpm) Low speed (INCH)
500–2,500 Stop improvement speed (POS)
(rpm) [Do not change this setting.]
INCH–1,000
Slow speed (SLOW)
(rpm)
INCH–3,000
Start backtacking limit speed (SBL) (See NOTE 27)
(rpm)
INCH–3,000
End backtacking speed (EBT)
(rpm)
INCH–HIL
Automatic speed (AUTO)
(rpm)
INCH–5,000
Maximum sewing speed limit speed (HIL) (See NOTE 29)
(rpm)
Setting details
S-7200A