JBL AVR580 Owner's Manual page 40

Multiroom Button 39 on the remote.
Next, press the Set Button p. Press
Buttons n to turn the
the /
⁄ ¤
multiroom feed on or off. When the
multiroom system is on, the Multiroom
Indicator D will light in the Main
Information Display ˜, and the
Lower Display Line B or OSD will
display MULTI ON. Press the Set
Button p to enter the setting.
When the multiroom system is turned on,
the input selected using the multiroom
menu will be fed to the Multiroom
Audio Outputs h on the rear panel.
The volume will be as set in the previous
selection, although it may also be
adjusted using an optional IR sensor and
the Zone II remote in the remote location,
or on the optional audio power amplifier
connected to the Multiroom Audio
Outputs h.
Once the multiroom system is turned on,
it will remain on even if the AVR580 is
placed in the Standby mode in the main
room by pressing the Power Off Button
å or the System Power Control 2
on the front panel. To turn off the multi-
room system, even when the AVR is in
Standby mode in the main listening room,
press the Multiroom Button 39 and
then the Set Button p. Press the
Buttons n so that the
/
⁄ ¤
Multiroom Indicator D in the Main
Information Display ˜ goes out, and
the Main Information Display ˜ or
OSD will display MULT I OFF. Press
the Set Button p to enter the setting
and turn the unit off.
Even when the AVR580 is turned off in
the main room, the multiroom system
may be turned on at any time by pressing
39
the Multiroom Button , or any of
the Selector Buttons ∫ç∂ in
the remote room.
40