Specifications - JBL GTS100 Owner's Manual

Specifications

Continuous Power Output
(20Hz – 20kHz,
14.4V Battery Voltage)
Signal to Noise Ratio
Frequency Response
Damping Factor
Slew Factor
Line Level Input Sensitivity
(for rated power)
Line Level Input Impedance
Speaker Level Input Impedance
Speaker Level Input Sensitivity
Preamp Output Sensitivity
Minimum Speaker Impedance
Single Ended, Non-Bridged
Bridged
Built-In Electronic Crossover
Frequency and Slope
Power Requirement
Fuse Size
Size (L x W x H)
Weight
Speaker Input / Output Mating
Connector
Power Mating Connector
35 watts x 2
(4 Ohms, 0.05% THD)
50 watts x 2
(2 Ohms, 0.08% THD)
100 Watts x 1
(4 Ohms, 0.08% THD)
100dBA
10Hz – 50kHz (+0, – 1dB)
20Hz – 20kHz (+0, – 0.1dB)
>200
>5
100mV – 4V RMS (500mV at center detent)
10k Ohms
15 Ohms
200mV – 8V RMS (1V at center detent)
2V Out for 4V Speaker Level Input
2 Ohms
4 Ohms
80Hz, 18dB per octave Low Pass Filter
100Hz, 18dB per octave High Pass Filter
11 to 16V DC Negative Ground
20 Amp ATC Type Fuse
6 5 / " x 9 1 / " x 2"
8 4
(168.3mm x 235.0mm x 50.8mm)
4lbs. 3oz. (1.90kg)
Molex Mini-Fit Jr. # 39-01-2040
Metal Pins: 39-00-0038
Plastic Housing: AMP #1-480700-0
Metal Pins for Ground & +12V: AMP # 350923-3
Metal Pins for Rem. In: AMP # 350536-1
29