Toshiba e-Studio 452 Operator's Manual page 315

3
Lower the guide while holding the knob.
A: Stapling area
Do not touch the stapling area. The stapler could injure you.
4
Remove any jammed staples.
5
Hold the knob and raise the guide, and
then return the guide to its original posi-
tion.
6
Install the staple cartridge into the sta-
pler.
• Insert the cartridge until it is caught by the latch and fixed with a
click sound.
7
Install the finisher to the equipment.
Be careful not to let your fingers be caught between the equipment and the finisher (optional). This could injure
you.
A
10
313