Toshiba e-Studio 452 Operator's Manual page 298

5.Jam Symbols (Cont.)
2
Lift the green lever and remove any mis-
fed paper.
3
Remove any misfed paper in the paper
exit area.
4
Install the finisher to the equipment.
9
Be careful not to let your fingers be caught between the equipment and the finisher (optional). This could injure
you.
Releasing a paper misfeed in the Saddle Stitch Unit (optional)
1
Open the front cover of the Saddle Stitch
Finisher.
296
9.BLINKING GRAPHIC SYMBOLS