Toshiba e-Studio 452 Operator's Manual page 292

5.Jam Symbols (Cont.)
When installing the Hole Punch Unit (optional: MJ-6101)
5
Open the cover of the Hole Punch Unit.
6
Turn the knob counterclockwise to
remove any misfed paper.
7
Close the cover of the Hole Punch Unit.
9
8
Close the cover of the Bridge Unit.
9
Close the upper tray.
• Place both hands at the shaded area of the upper tray, and then
push and close the upper tray until it locks.
290
9.BLINKING GRAPHIC SYMBOLS