Panasonic AJ-HD3700H Operating Instructions Manual page 73

TC/CHR menu
∑ Changing the superimposing position
∑ Time code displays and VTR's operating modes
Display the time codes and VTR's operating modes as required.
Time code displays
CTL1: Control signal 1
CTL2: Control signal 2
LTCR: LTC time code readout value
LUBR: LTC user bit readout value
VTCR: VITC time code readout value
VUBR: VITC user bit readout value
≥The colon (":") between the seconds and frames denotes the readout mode of the time code
reader.
Hours Minutes Seconds
; ;
: ∑∑
∑∑
(1) Move the position using the cursor keys.
Cursor keys
≥When a cursor key is held down, the cursor will move more
quickly.
≥When the center cursor key is pressed, the superimposing re-
turns to its initial position.
Frames
; ;
: ∑∑. <
: ∑∑
Blinking display: Time code cannot be read out.
[ ]: First field
[. ]: Second field
[: ]: Time code can be read out or TCG value is displayed.
[ ]: Time code cannot be read out.
[. ]: DF mode ON
[: ]: DF mode OFF
– 73 –
Center cursor key
TCG: Value generated by time code generator
LUBG: Value of LTC user bit generated
VUBG: Value of VITC user bit generated
EXTC: External time code value
EXUB: External user bit value