Panasonic AJ-HD3700H Operating Instructions Manual page 61

AUDIO OUT MONITOR menu
Key Key designation
F1 MODE
For selecting the mode.
F2 L CH
F3 R CH
F4–F6 ——
F7 A.MONI
For selecting the audio
monitor output level
adjustment.
F8 EXIT
F9–F10 ——
F11 R CH
F12 L CH
F13 MODE
CUE OUT SELECT
This is used to select the main line CH1 through CH4 (8) signals serving as the CUE output. When the center cursor key is
pressed, CUE OUT SELECT is highlighted, enabling the setting to be selected. (If MONITOR MIX is highlighted, press the F key
and a cursor key (2 or 1) together to enable this setting to be selected.)
Select the channel using the cursor keys (2, 1, 3 and 4), and press the center cursor key to turn the selection ON or OFF.
MONITOR MIX
This is used to select the mixed left and right channel signals to be output to the MONITOR connector. As the selection condition,
not more than two channels (maximum 4 channels) among CH1 through CH4 and among CH5 through CH8 can be set to serve
as the left or right channel. When the center cursor key is pressed, MONITOR MIX is highlighted, enabling the setting to be
selected. (If CUE OUT SELECT is highlighted, press the F key and a cursor key (2 or 1) together to enable this setting to be
selected.)
Select the channel using the cursor keys (2, 1, 3 and 4), and press the center cursor key to turn the selection ON or OFF.
(This setting is for selecting the channels; whether or not the selected signals are to be actually set is performed by
switching between the F11 and F12 keys.)
Selects the VTR mode in which the monitor output signals are
automatically switched to the cue signals.
SHTL: Automatically outputs the playback signals of the
cue channel in the SHTL, FF or REW mode.
Outputs the signals of the channel selected by the
L and R buttons in any other mode.
VAR/SHTL: Automatically outputs the playback signals of the cue
channel in the SHTL, FF, REW, JOG or VAR mode.
Outputs the signals of the channel selected by the L and R
buttons in any other mode.
Selects whether the auto mode is to be activated for the left
channel.
OFF: Always outputs the channel signals selected by the L
button.
ON: Automatically outputs the cue signals in accordance with
the mode selected by F1.
Selects whether the auto mode is to be activated for the right
channel.
OFF: Always outputs the channel signals selected by the R
button.
ON: Automatically outputs the cue signals in accordance with
the mode selected by F1.
Selects whether to adjust the audio monitor output level using
the headphones volume control on the front panel.
UNITY: The audio monitor output level is forcibly fixed at the
UNITY value.
VAR: The level can be adjusted using the headphones
volume control.
Returns the VTR to the AUDIO OUT menu screen.
For setting whether the signals from the left and right channels
are to be mixed and output to the MONITOR connector.
OFF: The signals are not mixed.
ON: The signals are mixed.
For selecting the way in which the channel signals output to the
MONITOR connector are to be mixed.
ADD: Simple addition
AVERAGE: Simple averaging
– 61 –
Description