Panasonic AJ-HD3700H Operating Instructions Manual page 18

HOME SET UP menu
Key Key designation
F1 SYNC PLY
Sync play.
F2 AT PLY
For switching the playback
picture in JOG/VAR.
F3 PRG PLAY
Program play.
F4 PRG PLAY
Program play.
F5 CAP LOCK°
For setting the capstan
servo lock
F6 TAPE MD.
Tape mode when the VTR
is in standby OFF.
F7 ——
F8 EXIT
1
This item is not displayed when the 720/59p mode has been selected.
°
2 This item does not funtion when the 720/59p, 1080/23Psf or 1080/24Psf mode has been selected.
°
3
ONoteN
°
In the 1080/59i mode, the factory setting for this item is 2F. In the 1080/23p mode, it is 8F AUTO. The fact that the factory
setting differs depending on the format should be borne in mind when one format is converted into another.
Automatically compensates for the start initiated for the playback
mode. For instance, when the VTR is set to the playback mode
from the preroll point, it synchronizes its own phase to ensure
that the tape arrives at the IN point after the preroll time has
elapsed. (The function takes effect only when the front panel
controls are used for operation.)
ON:
OFF: Normal playback is assumed.
FIELD:
FRAME1°
FRAME2°
Selects the variable step for program play.
FINE:
COARSE: 1.0% step
Normal playback occurs at variable speed within the range of
n5% with the variable step of the F3 key.
Refer to "Programmed play function".
3 Selects the capstan servo lock mode during playback.
4F AUTO (8F AUTO: 1080/23p, 1080/24p, 1080/50i):
Assumes color frame auto lock mode. If there is any discontinuity
in the color frame during playback, the unit locks again at a new
color frame.
4F FORCE (8F FORCE: 1080/23p, 1080/24p, 1080/50i):
Assumes color frame forced lock mode. If there is any
discontinuity in the color frame during playback, the unit
preserves the field sequence at initial lock.
2F: Assumes frame lock mode.
≥The capstan servo lock mode can be set in AUTO (or
MANUAL) EDIT SET UP menu. If the two settings differ, priority
is given to the final mode setting.
HD.STOP:
HLF LOAD: Half-loads the tape.
Returns the VTR to the HOME menu screen.
Description
Sync play function operates.
Plays the tape field by field.
1 /
2 : Plays back on a frame by frame basis at the j1a to
i1a speed and on a field by field basis at all other
speeds. If the tape material image has a scene
cutoff when moving from No. 2 field to No. 1 field,
as when editing with the No. 1 field as cutoff, use
FRAME 1.
Use Frame 2 when the No. 2 field is the scene
cutoff.
0.1% step
Stops the drum when the tape is loose.
– 18 –