Specifications - JBL CSB5 Owner's Manual

Cinema sound
Hide thumbs Also See for CSB5:
Table of Contents

Advertisement

CS OM
6/5/06
11:43 AM

SPECIFICATIONS

System
Frequency Response
27Hz – 30kHz (–6dB)
CST55
Maximum Recommended Amplifier Power
150 Watts*
Power Handling 50W continuous/300W peak
Frequency Response 55Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 90dB @ 1 watt/1 meter
Tweeter
3/4" (19mm) Titanium-laminate dome,
video-shielded
Woofers
Dual 5" (130mm) transducers with PolyPlas
cones, neodymium magnets and HeatScape
motor structure, video-shielded
Dimensions (H x W x D)
(including base and grille)
46" x 11-1/4" x 11-1/4" (1168mm x 286mm x 286mm)
Weight 17 lb (7.7kg)
CSB5
Maximum Recommended Amplifier Power
125 Watts*
Power Handling 40W continuous/300W peak
Frequency Response 60Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 88dB @ 1 watt/1 meter
Tweeter
3/4" (19mm) Titanium-laminate dome,
video-shielded
Woofer
5" (130mm) Transducer with PolyPlas
neodymium magnet and HeatScape
structure, video-shielded
Dimensions (H x W x D)
(including base and grille)
14-5/16" x 6-1/8" x 4-9/16"
(363mm x 155mm x 116mm)
Weight 5 lb (2.3kg)
Dimensions (H x W x D)
(without base and with wall-mount bracket
and grille)
13-5/16" x 6-1/8" x 5-1/8"
(338mm x 155mm x 130mm)
Weight 4.5 lb (2kg)
Page 11
CSC55
Maximum Recommended Amplifier Power
150 Watts*
Power Handling 50W continuous/300W peak
Frequency Response 55Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 90dB @ 1 watt/1 meter
Tweeter
3/4" (19mm) Titanium-laminate dome,
video-shielded
Woofers
Dual 5" (130mm) transducers with PolyPlas
cones, neodymium magnets and HeatScape
motor structure, video-shielded
Dimensions (H x W x D)
(including wall-mount bracket and grille)
6-1/4" x 26-1/4" x 4-1/4" (159mm x 667mm x 108mm)
Weight 10 lb (4.5kg)
CSS10
Amplifier Power 150 Watts RMS
Frequency Response 27Hz – Low-pass
crossover setting at signal source
Low-Frequency Driver
10" (250mm) Cone and HeatScape
motor structure, video-shielded
Input LFE preamp level
Dimensions (H x W x D) (including feet)
18-1/4" x 13-1/4" x 16"
(464mm x 337mm x 406mm)
Weight 43 lb (19.5kg)
cone,
motor
* The maximum recommended amplifier power rating will
All features and specifications are subject to change
without notice.
Dolby and Pro Logic are registered trademarks of
Dolby Laboratories.
DTS is a registered trademark of DTS, Inc.
ensure proper system headroom to allow for occasional
peaks. We do not recommend sustained operation at
these maximum power levels.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Css10Cst55Csc55

Table of Contents