Removing & Installing Body Components
Seat
Front stay
Rear stays
64
❙
Removal
1. Insert the ignition key into the seat lock,
2. Pull the seat back and up.
Prongs
❙
Seat
Installation
1. Insert the front and rear prongs into the
Seat lock
2. Push forward and down on the rear of the
The seat locks automatically when closed.
Ignition key
Take care not to lock your key in the under
seat compartment.
and turn it clockwise.
front and rear stays on the frame.
seat until it locks in place. Make sure that
the seat is locked securely in position by
pulling it up lightly.