Maintenance And Care; Emptying The Dirt Cup - Bissell 6489 SERIES User Manual

M
aintenance and care

Emptying the dirt cup

Empty the dirt cup as soon as the dirt reaches
the "FULL" lines on the sides of the dirt cup.
1. Unplug the vacuum from the
electrical outlet.
2. Remove the hose by turning the hose
connector counter clockwise and pulling it
out from the suction inlet. Set hose aside.
3. Press the dirt cup release button on
the carry handle and lift up to remove
the dirt cup.
4. Choose an emptying method. Method
#2 is recommended for allergy suffers.
Method #1 – Hold the dirt cup over a
trash can and push the emptying button
to open the bottom. Close the bottom
after the dirt empties.
Method #2 – Place a plastic bag over
the bottom of the dirt cup. Push the
emptying button through the plastic to
open the bottom. After the dust settles,
close the bottom and remove the bag
to discard.
5. Replace the dirt cup by placing it back
into the vacuum and pushing down
on the carry handle until it snaps back
into place.
8
w w w . b i s s e l l . c o m w w w . b i s s e l l . c o m
WARNING:
To reduce the risk of electric
shock, turn power switch OFF
and disconnect plug from
electrical outlet before
performing maintenance or
troubleshooting checks.
2.
3.
4.
8 0 0 . 2 3 7 . 7 6 9 1 8 0 0 . 2 3 7 . 7 6 9 1
Dirt Cup
Release
Button
Emptying
Button