Do you have a question about the Zing 4122 series and is the answer not in the manual?
Questions and answers
TOVA may
February 23, 2025
How do I take off the floor nozzle in order to use the wand?
1 comments:
Mr. Anderson
May 14, 2025
To remove the floor nozzle from the Bissell Zing 4122 series, disconnect it from the telescoping extension wand. This allows you to use the wand with other tools such as the crevice tool or dusting brush.
Page 1
Meijer.com Earn BISSELL Rewards! Earn BISSELL Rewards! egister your egister your product today! product today! See details on See details on back page back page USER'S GUIDE 4122 SERIES Thank You Safety Instructions Product View Assembly Operations Maintenance and Care...
Page 2
Your BISSELL Zing canister vacuum is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
Meijer.com MPORTANT SAFETY INSTRUCTIONS When using an electrical appli- ■ Do not pick up flammable or combus- tible materials (lighter fluid, gasoline, ance, basic precautions should be kerosene, etc.) or use in the presence observed, including the following: of explosive liquids or vapor. REAd ALL INSTRUCTIONS ■...
Meijer.com roduct view Air Flow Flex Hose Regulator Telescoping Extension Wand Swivel Hose Bag Change Indicator Tool Caddy Brush Switch Power Automatic Cord Button Rewind Button Post-Motor Filter Variable Suction Multi-Surface Power Control Floor Nozzle CAUTION: Do not plug in your vacuum until you are familiar with all instructions and operating procedures.
NOTE: Shorten length of telescopic tube for storage. perations Special tools Your BISSELL Zing canister is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile bare floor and above Tip: Tip: floor vacuum cleaner when you select one of the special tools.
Meijer.com perations Power cord The power cord is located at the rear of the vacuum. Gently pull out the power cord, watching for the yellow line. Stop pulling the power cord once the yellow line is visible. There is also a red line, which indicates the end of the usable cord.
Indicator the hose or tools. Replace dust bag Never reuse a dust bag. Use only BISSELL replacement dust bags in your Zing Bagged canister vacuum. 1. Turn the power OFF ( ). Unplug the vacuum from electrical outlet.
Page 8
Cleaning and replacing the pre-motor and post-motor filter Filters protect the motor from dirt and dust NOTICE: particles. Use only BISSELL replacement filters in your Zing Bagged canister vacuum. This product is intended for house- 1. Turn the power OFF ( ). Unplug the hold use only and not for commer- vacuum from electrical outlet.
Thank you for selecting a BISSELL product. Please do not return this product to the store. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691. w w w . b i s s e l l . c o m...
Page 10
Meijer.com eplacement parts - BISSELL vacuum Item Part No. Part Name 213-8425 Dust Bags (3-pack) 203-8426 Pre-Motor Filter 203-8427 Post-Motor Filter ccessories Item Part No. Part Name 203-8428 Floor Nozzle 203-8418 Extension Wands with Tool Caddy 203-7280 Combination Crevice Tool/Dusting Brush...
Page 11
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, or regular mail as described below.
Page 12
Grand Rapids MI 49501 ATTN: Consumer Care Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of cleaner available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim.
Need help?
Do you have a question about the Zing 4122 series and is the answer not in the manual?
Questions and answers
How do I take off the floor nozzle in order to use the wand?
To remove the floor nozzle from the Bissell Zing 4122 series, disconnect it from the telescoping extension wand. This allows you to use the wand with other tools such as the crevice tool or dusting brush.
This answer is automatically generated