Nikon CoolPix AW120 Reference Manual page 53

C
The Auto Off Function
No operations
performed
40
30
20
10
0
15m 15m 15m
1010hPa 1010hPa 1010hPa
-10
25m 0s 25m 0s
880 880
• The time that elapses before the camera enters standby mode is about 1 minute.
The time can be changed using the Auto off setting in the setup menu (A76).
• While the camera is in standby mode, the monitor turns back on if you perform any
of the following operations:
➝ Press the power switch, shutter-release button, A (shooting mode) button, c
(playback) button, or b (e movie-record) button
• While the charging AC adapter is connected to the camera, the monitor turns back
on if you press the power switch. The camera turns off if you press the shutter-
release button, A (shooting mode) button, c (playback) button, or b (e
movie-record) button.
Flashes
No operations
performed
3 min
Camera enters
standby mode.
Camera turns off.
23